Contact Details
Thermal Economics Ltd
Thermal House
8 Cardiff Road
Luton
Bedfordshire
LU1 1PP
Isorubber Wave
Isorubber Wave is a very high performance acoustic insulation and vibration Isolating mat. It has a flat upper surface and profiled lower surface. Available in different thicknesses Isorubber Wave is used in extremely sensitive situations where exacting performance is required.
Technical Data Sheets
Product Specifications
Colour Beige/Brown
Roll Size 8/4mm x 1.25m x 8m, 17/8mm x 1.25m x 8m
Density 300-400kg/m³
Service temp. range -30°C to +80°C
Elongation at Break 30%-70%
Tensile Strength 0.55N/mm2
Global Warming Potential Less than 5
Ozone Depletion Potential Zero
3 BREEAM Multi-residential achievable
This floor construction can achieve 3 Credits. Pre-completion testing is required to claim credits.
Easy Installation
Simple installation process that does not require any specialist tools or equipment.
High Performance Acoustic Product
For use where high levels of acoustic isolation are required.
Made from Recycled Waste Rubber
This product provides a useful application for material that would otherwise go into landfill.
New Build
Suitable for use in new build projects.
Part E Compliant Construction
This floor construction is Part E compliant; pre-completion testing is required.
Refurb
Suitable for use in refurbishment projects.
Vibration Isolation
This product is designed to isolate low frequency sound and provide vibration absorption.
Click the benefit icon and further information about benefits will appear here.
Main Applicaitons
High Performance Impact Sound Reduction
The 3D shaped underside of Isorubber Wave has been specifically designed to provide excellent impact sound reduction. When used beneath a screed it can provide excellent sound test results. It is ideally suited to projects that require higher than usual impact sound reduction.
Vibration Isolation and Structural Protection
Isorubber Wave can be used below concrete slabs to provide vibration isolation, it is available in various thicknesses and can be used in multiple layers to suit the specific frequency or load that needs to be isolated. Suitable for use under compression stress of σmax < 0.030N/mm2
