Contact Details
Thermal Economics Ltd
Thermal House
8 Cardiff Road
Luton
Bedfordshire
LU1 1PP
Robust Detail E-FC-16
Robust Detail E-FC-16 is a fixed, resilient surface layer acoustic insulation system for precast plank floors. E-FC-16 provides 3 Code for Sustainable Homes Credits upon registration. The system consists of 3mm thick Isorubber CC3 adhered to the screeded surface of a Precast Plank floor using Isobond Adhesive and a Metal Frame ceiling supported on Isosonic Ceiling Cleats making it perfect for Sound Proofing and Noise Reduction applications.
System Summary
Robust Detail E-FC-16 is an acoustic solution for precast plank floors. This system provides a minimum 5dB improvement the requirements of Approved Document Part E. When registered with Robust Details Ltd the requirement for on-site sound testing is removed and 3 Code for Sustainable Homes / BREEAM / Home Quality Mark credits are automatically awarded.
Benefits
- Exceeds Building Regulation requirements by minimum of 5dB.
- No need for sound testing if registered with Robust Details Ltd.
- Provides 3 CSH/BREEAM/HQM credits upon registration.
- System uses Isorubber CC3, a hard-wearing acoustic covering to reduce noise transfer.
- Isorubber CC3 is only 3mm thick, minimising construction depths.
- No long term / short term deformation of acoustic layer.
- Suitable for use with Under Floor Heating
Components & Specifications
Acoustic Performance
As a Robust Detail that provides 3 Code for Sustainable Homes Credits the E-FC-16 system must always achieve individual site test values of:
Airborne Sound – not less than 50db (Dntw + Ctr)
Impact Sound – not greater than 57db(Lntw)
Isorubber CC3
Density 610Kg/m3
Roll Size 3mm x 1m x 20m
Roll Weight 42Kg (11 Rolls per pallet)
Isorubber CC3 is a 3mm thick acoustic insulation that is adhered to a floor surface, absorbing impact sound at source. A durable acoustic underlay with a density of approximately 600Kg/m3, Isorubber CC3 has excellent impact energy absorption properties.
Scroll for more
Find out more about this system, read an in depth report, and see our carefully curated instructions on how to get the best results when installing your solution.
Brochures
Installation Guide
Technical Data Sheets
Isorubber CC3 TDS
Isobond Adhesive TDS
Isoedge & Isosonic Ceiling Strip TDS
Isosonic Ceiling Cleats TDS
Safety Data Sheets
Isorubber CC3 SDS
Isobond Adhesive SDS
Isoedge & Isosonic Ceiling Strip SDS
About System
The E-FC-16 system is the latest in Thermal Economics’ formidable Robust Detail portfolio and is the third to be awarded 3 Code for Sustainable Homes Credit status. It is designed to be easy to install, helping to reduce the risk of workmanship errors. Isorubber CC3 provides a compatible base for almost all types of floor covering including carpets, vinyl, stone, ceramics, solid wood and laminates. It also provides massive cost savings over more traditional floating floor systems.
The E-FC-16 system consists of 3mm Isorubber CC3 fitted over a minimum 65mm sand & cement screed. The structural floor must be a minimum 150mm precast plank with a minimum mass of 300Kg/m2 per unit area. This system can be used with all masonry external flanking wall constructions (600 – 800Kg/m3, 1350 – 1600Kg/m3 & 1850 – 2300Kg/m3). A metal frame ceiling supported by Isosonic Cleats with a minimum void of 100mm, under drawn with a layer of gypsum based board (minimum 9.8Kg/m2) is also required. During the extensive site testing carried out for Robust Detail classification all 30 of the impact and airborne tests had to achieve a minimum 5dB improvement over regulation requirements to gain this status. Due to this excellent performance record any site that registers the E-FC-16 system with Robust Details is automatically awarded 3 Code for Sustainable Homes Credits.
The E-FC-16 system can also be used in non Robust Detail specifications, subject to pre-completion testing.
3 Code for Sustainable Homes Credits Awarded
This floor construction provides 3 Credits upon registration of Robust Detail, as it achieves a minimum 5dB over regulation requirements.
Aircrete Blocks
This floor construction is suitable for use in combination with aircrete block walls.
Compatible with UFH
Suitable for use with all types of Under Floor Heating Systems.
Easy Installation
Simple installation process that does not require any specialist tools or equipment.
High Performance Acoustic Product
For use where high levels of acoustic isolation are required.
Made from Recycled Waste Rubber
This product provides a useful application for material that would otherwise go into landfill.
Minimal increase in Construction Depth
This product can comply with Part E impact sound requirements in just a 3mm thickness.
Robust Detail Compliant Construction
This floor construction is Robust Detail compliant; no pre-completion testing is required when registered.
Click the benefit icon and further information about benefits will appear here.
Installation steps
