product template - Thermal Economics Thermal Insulation

Isorubber CC3

Isorubber CC3 is a 3mm thick acoustic insulation that is adhered to a floor surface, absorbing impact sound at source. A durable acoustic underlay with a density of approximately 600Kg/m³, Isorubber CC3 has excellent impact energy absorption properties.

Isorubber CC3 is suitable for use with almost all types of soft and hard floor coverings and has been tested by SATRA and CERAM. While it is not intended for use as a permanent exposed surface, Isorubber CC3 can be left as a ‘selling surface’ and has been ware tested by the British Carpet Technical Centre.

A composite of sustainably sourced, granulated cork and recycled waste rubber Isorubber CC3 has a Global Warming Potential of Zero and an Ozone Depletion Potential of Zero. Isorubber CC3 provides a means of using problematic waste material to the benefit of the environment.

Brochures

E-FC-16 Brochure

Installation Guides

E-FC-16 Installation Guide

Technical Data Sheets

Isorubber CC3 Technical Data Sheet

Safety Data Sheets

IsoRubber CC3 Safety Data Sheet

Product Specifications

Density 610Kg/m3

Roll Size 3mm x 1m x 20m

Roll Weight 42Kg (11 Rolls per pallet)

Colour Beige with multi coloured flecks

Elongation at Break 20%

Tensile Strength 0.3N/mm2

Impact Reduction 18dB ΔLw

Service temp. range -30°C to +80°C

Global Warming Potential Less than 5

Ozone Depletion Potential Zero

3 BREEAM Multi-residential achievable

This floor construction can achieve 3 Credits. Pre-completion testing is required to claim credits.

3 BREEAM Multi-residential Credits Awarded

This floor construction provides 3 Credits upon registration of Robust Detail, as it achieves a minimum 5dB over-regulation requirements.

3 Code for Sustainable Homes Credits achievable

This floor construction can achieve 3 Credits. Pre-completion testing is required to claim credits.

3 Code for Sustainable Homes Credits Awarded

This floor construction provides 3 Credits upon registration of Robust Detail, as it achieves a minimum 5dB over regulation requirements.

Aircrete Blocks

This floor construction is suitable for use in combination with aircrete block walls.

BBA Certified Product

This product has third party certification from the British Board of Agreement.

Beam & Block

Suitable for use in Beam & Block floor constructions

Breathable Product

This product is vapour permeable. By allowing water vapour to escape it can be used to help reduce the risk of condensation.

Click the benefit icon and further information about benefits will appear here.

Main Applicaitons

Robust Detail E-FC-16
Robust Detail E-FC-16 is a fixed, resilient surface layer acoustic insulation system for precast plank floors. E-FC-16 provides 3 Code for Sustainable Homes Credits upon registration. These credits are also applicable under the BREEAM multi-residential category, pre-completion testing is required for other BREEAM categories.

The system consists of 3mm thick Isorubber CC3 adhered to the screeded surface of a Precast Plank floor using Isobond Adhesive and a Metal Frame ceiling supported on Isosonic Ceiling Cleats.