System Summary

The ZebraFloor Eco system is a simple and cost-effective R1 classified insulated beam and block flooring system that is made up of 2 main components. 

ZebraFloor Eco Infill Planks – Unique EPS planks that fit between flooring beams. 

 ZebraFloor Top Sheet – High performance EPS boards designed specifically with the thermal resistance and strength required in this application.  

Components & Specifications

Board Size  1200mm x 2400mm
Thickness  75-300mm
Density  25 – 32 kg/m3 (nominal)
Bending Strength  170 – 250 kPa
Compressive Strength  120 – 200 kPa (@ 10% deformation)
Thermal Conductivity of EPS (λ)  0.030 – 0.033W/m∙K
BRE Green Guide Rating  A+
Global Warming Potential  < 5
Ozone Depletion Potential  Zero
Board Size  440mm x 1200mm
Thickness  100mm
Density  18 – 20 kg/m3
Bending Strength  150 kPa
Compressive Strength  100 kPa (@ 10% deformation)
Thermal Conductivity of EPS (λ)  0.035W/m∙K
BRE Green Guide Rating  A+
Global Warming Potential  < 5
Ozone Depletion Potential  Zero

U-Values

About System

The ZebraFloor Eco system provides our most cost effective way to achieve low U-values in beam and block floor constructions. This is achieved by replacing the concrete blocks with ZebraFloor Eco Infill Planks to provide insulation and form work. This is then covered by a high performance ZebraFloor Topsheet followed by a structural concrete topping.

ZebraFloor Eco Infill Planks

The ZebraFloor Eco system has been designed to be as efficient to install as possible. Each plank is 1200mm long, the equivalent of more than five standard concrete blocks, making installation very quick and simple. The planks are 440mm wide, this means that there is no need to change any existing beam designs and their square edges make them suitable for use with all major beam suppliers.

ZebraFloor Topsheet

This high performance EPS insulation has excellent thermal and compressive strength performance. It is available in a range of thicknesses, allowing low U-values to be achieved while maintaining a thin overall floor construction.

ZebraFloor Topsheet is also available in two compressive strength variants, Topsheet 120 and Topsheet 200. ZebraFloor Topsheet 120 designed for normal domestic loads, while ZebraFloor Topsheet 200 is projects where higher than normal loading is expected. A structural engineer should always be consulted when specifying this type of product.

ZebraFloor boards are UKCA marked and tested to BS EN 15037-4.

Environmental

The EPS used in these products is recyclable and has a BRE Green Guide A+ environmental rating. No blowing agents are used in the production of ZebraFloor products and they have an Ozone Depletion Potential (ODP) of zero and a Global Warming Potential (GWP) of less than 5.

Cost-effective Solution

Cost-effective Solution

Easy Installation

Easy Installation

Global Warming Potential less than 5

Global Warming Potential less than 5

Made in Britain

Made in Britain

Ozone Depletion Potential Zero

Ozone Depletion Potential Zero

Part L solution

Part L solution

Section 6 Solution

Section 6 Solution

Logo

Click the benefit icon and further information about benefits will appear here.